Installing The Software - Siemens SIMATIC IPC327E Operating Instructions Manual

Procedure - removing
Procedure - installation
Proceed in reverse order.
6.5

Installing the software

Information on installation of the operating system is available on the Internet and on the
supplied DVD:
Microsoft® Windows® 7 (https://support.industry.siemens.com/cs/ww/en/view/109752041)
Microsoft® Windows® 10 (https://support.industry.siemens.com/cs/ww/en/view/109768887)
Note
Before installing Windows 10, set the boot mode and video as UEFI in BIOS. On how to set
the boot mode and Video, refer to Boot Setup (Page 71).
Note
To restore or recovery your Windows 10 system, you can use the Windows 10 restore DVD
for IPC 327E/377E.
SIMATIC IPC327E
Operating Instructions, 06/2019, A5E40965257-AD
Maintaining and repairing the device
6.5 Installing the software
Pull out the connection plug.
Lay down the device's rear panel
including the drive.
Remove the indicated screws.
Take out the HDD.
41