Siemens SIMATIC IPC327E Operating Instructions Manual page 21

Possible mounting types of the device:
Mounting on a
standard rail
Wall mounting
The mounting types are described in the following sections using the basic device as an
example.
Position of the interfaces
For standard rail, the interface side of device can point either up or down. In the case of wall
mounting, the interface side of the device can point up, down, to the left or to the right.
Fasten securely
NOTICE
Insufficient load carrying capacity
If the mounting surface for wall and vertical mounting does not have sufficient load carrying
capability, the device may fall down and be damaged.
Ensure that the mounting surface on the wall can bear four times the total weight of the
device, including fixing elements.
SIMATIC IPC327E
Operating Instructions, 06/2019, A5E40965257-AD
Installing and connecting the device
3.2 Mounting the device
21