Printer Interface - Siemens Cerberus CS1140 Planning

30

Printer interface

30.1 Features
30.2 Application variant CT11
AlgoPilot B3Q...
ST2 F20A020
C-Bus
24V
(9...36V
AlgoPilot B3Q...
ST2 F20A410
max. 1m
24V
C-Bus
Requirement:
The printer B2Q191 must be in the same cabinet as the
operation unit B3Q... or in an immediately adjacent cabinet
With this application:
Ground wire to be removed from 'K3-5' and connected to
chassis ground (otherwise results in ground fault)
82
Fire & Security Products
Siemens Building Technologies Group
Provided with station types CT11, CI11, CC11
Designed for Cerberus printer or commercially available printer with ISO or EPSON
character set
Additional hardware required for level adaptation according to application
Printer B2Q191 can be connected direct (when mounted inside cabinet)
The printer can be individually switched on/off via the operating unit
Always allocated to all existing AREAS for the station used
Individual parameterization for each printer interface
The event memory can be printed only if the printer is connected to a station CI11 or CT11
CT11
I-Bus
E3I020
ST1
ST2
RS232
max.1000m
or
K3
B2Q191
DC
K2
DC)
CT11
I-Bus
(TTL)
B2Q191
A3
DC
K2
B3Q...
F20A020
in cabinet H26/H28
F20A410
B2Q191
in cabinet H26/H28
E3I020
to printer
ST2
Z1B020
B3Q...
e4595e 30
05.2003