Sony MCC-1000MD Instructions For Use Manual page 10

Guidance and manufacturer's declaration – electromagnetic immunity
The MCC-1000MD is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. Portable RF communications equipment should be used no closer
than 30 cm (12 inches) to any part of the MCC-1000MD. Otherwise, degradation of the
performance of this equipment could result.
Immunity test
Proximity fields
from RF wireless
communications
equipment
IEC 61000-4-3
NOTE: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
a For some services, only the uplink frequencies are included.
a
Band Service
380 –
TETRA 400
390 MHz
430 – GMRS 460
470 MHz
FRS 460
704 –
LTE Band
787 MHz
13, 17
GSM 800/
900
800 – TETRA 800
960 MHz
iDEN 820
CDMA 850
LTE Band 5
GSM 1800
CDMA 1900
GSM 1900
1,700 –
DECT
1,990 MHz
LTE Band
1, 3, 4, 25
UMTS
Bluetooth
WLAN
2,400 –
802.11 b/g/n
2,570 MHz
RFID 2450
LTE Band 7
5,100 – WLAN
5,800 MHz 802.11 a/n
a
Modulation
Pulse
modulation
18 Hz
FM
±5 kHz
deviation
1 kHz sine
Pulse
modulation
217 Hz
Pulse
modulation
18 Hz
Pulse
modulation
217 Hz
Pulse
modulation
217 Hz
Pulse
modulation
217 Hz
10
IEC 60601 Compliance
test level level
27 V/m 27 V/m
28 V/m 28 V/m
9 V/m 9 V/m
28 V/m 28 V/m
28 V/m 28 V/m
28 V/m 28 V/m
9 V/m 9 V/m