Sony CCMA-2DAR Connection Manual

Microscope Connection Guide for the CCMA-2DAR Adapter
1.
2.
1
3.
4.
2 3
5.
4
6
6.
5

Connection

1
Remove the camera head cap.
4
Attach the Leica attachment to the adapter while turning its
6
mount ring.
Connect the camera cable to the camera head.
9
*Align the cable slot with the top of the camera head, and turn the cable ring to secure it.
and the MCC-1000MD
Connecting to the Leica M525
1
Leica M525
Controller cable
Camera head (MCC-1000MD)
Controller
Attachment for Leica
Camera adapter (CCMA-2DAR)
1
2

Operating Procedure

Pull off the microscope
2
cap.
Camera head
(MCC-1000MD)
5
Mount ring

Preparation

Insert two AA batteries into the
controller.
Remove the front lens
3
cap of the camera
adapter.
Camera adapter
(CCMA-2DAR)
Attaching the camera head (MCC-1000MD) to the adapter.
• Align the lens mount thread of the camera head with the camera adapter connector, then turn the camera head
clockwise to secure it to the unit. At this time, please do not align the planes of the camera and the adapter forcibly.
Camera adapter with
7
the Leica attachment
Connection setup is
10
complete (finished state).
Print the chart for adjusting the viewing
2
angle position onto A4-size paper.
Remove the camera connector cap.
Insert the adapter into Connect the controller to
8
the microscope (gently, the adapter by pushing
with both hands). inwards until it clicks;
there is no need to turn
the controller.