Creating And Editing Playlists; Playlist Edit - Solid State Logic C100 HDS Software Update Manual

Creating and Editing Playlists

To edit a Playlist (or to create a new Playlist based on an old one), use the Master Scroller to select the Playlist, then touch

Playlist Edit.

Note that if you are creating a new Playlist based on an old one, remember to use the Save As function, to avoid losing
the original Playlist!
To create a Playlist from scratch, use the Master Scroller to select the < new playlist> option in the Playlist list.
Add Cuts to Playlist,
at end (Append)
or at selected
location (Insert)
Cuts currently
in Playlist
Playlist Audition
controls
Cuts which are currently included in the Playlist are displayed in the list in the centre of the Playlist Edit window.
To add new Cuts, touch Append or Insert – the Append button adds new Cuts to the end of the Playlist, and the
Insert button inserts them above the currently highlighted Cut. The appropriate button will light, and the central list will
switch to displaying the Player's Cuts files and folders. Select the Cut to be added, using the normal C-Play navigation
procedures.
Note: To add a Cut to the end of a playlist using Insert mode, highlight the empty space below the last Cut displayed
and press Insert.
In Insert mode, the display will revert to normal Playlist Edit view once a Cut has been selected.
In Append mode, the display will remain in Cut List view, allowing more Cuts to be Appended. A black number will appear
to the left of each selected Cut to indicate the order in which it will appear in the Playlist. Re-press the Append button
to finish adding Cuts and return to the normal Playlist Edit view.
Note that the Audition button must not be active during an Append or Insert procedure, or else files will be auditioned,
not added to the Playlist.
V4.2/6 Software Update
Close Playlist Edit, or
finish adding new Cuts
Define whether each
Cut plays automatically
or requires manual
triggering
Open Cut Edit
for selected Cut
Page 17