Removing The Wireless Lan Module - Clevo W670SHQ Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 14
Wireless LAN
1. Turn off the computer, turn it over, remove the battery
Module Removal
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cables
a. Locate the WLAN.
4. The Wireless LAN module
b. Disconnect the cables
and remove the screw.
c. The WLAN module will a.
pop up.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket (Figure 14b).
b.

5.Wireless LAN Module
• 1 Screw
2 - 18 Removing the Wireless LAN Module
&
2 3
(Figure 14c) will pop-up, and you can remove it from the computer.
5
1
4
2
3
(page 2 - 5) and the component bay cover
on the mainboard (Figure
1
, and then remove the screw (Figure
4
c.
5
(page 2 - 7).
14a).
14b)
5