Msw Code - Sony DCR-IP45 Service Manual

2-2. MSW Code

MSW when errors occur:
Information on MSW (mode SW) when errors occur
MSW when movement starts:
Information on MSW when movements starts when the
mechanism position is moved (When the L motor is moved)
MSW of target of movement:
Information on target MSW of movement when the mechanism
position is moved
Mechanical Position
← UNLOAD
BL BL
EJECT USE
LS chassis
movement
section
Lock released
Cassette compartment
Position Code
EJECT
BL
USE
LSE
STOP
PB
REW
BL
LSE STOP
Position at which the cassette component lock is released, at the farthest unload side mechanically
2
at which the mechanism can move no further in the UNLOAD direction.
BLANK code, at the boundary between codes. The mechanism will not be stopped by this code
7
while it is operating. (Except LOAD/UNLOAD)
EJECT completion position. When the cassette is ejected, the mechanism will stop at this position.
3 Cassette IN standby. The guide will start protruding out as the mechanism moves towards the
LOAD position.
1 LS chassis loading completion position.
Stop position in the loading state. The pinch roller separates, the tension regulator returns, and the
5
brake is imposed on both reels.
4 PB, REC, CUE, PAUSE, FF positions. The pinch roller is pressed, and the tension regulator is ON.
6 REW, REVIEW positions. The pinch roller is pressed, and the tension regulator is ON.
LOAD →
BL BL
PB REW
Pinch roller pressing
Contents
5-65
DCR-IP45/IP45E/IP55/IP55E
← Fixed at "0"
← A
← B
← C (LSB)