Af Laser Output Adjustment - Sony DCR-IP45 Service Manual

17. AF Laser Output Adjustment

Set the AF laser output to an appropriate level.
Subject Paper which reflection rate is 18%
(50cm from the front of the lens)
(Note1)
Measurement Point Adjustment remote commander
Measuring Instrument
Adjustment Page F
Adjustment Address 66 to 6C
Specified Value Data of address: 66 is "10" to "FF".
Data of address: 6B is "15" to "20".
Note1: Background paper (J-2501-130-A). Perform this adjustment in the
dark room or use a dark box.
Note2: Any light other than the laser light should not light up the paper.
Note3: This adjustment should be carried out upon completion of the
following adjustments.
"HALL Adjustment", "Flange Back Adjustment"
Note4: The data of page: 0, address: 10 must be "00".
Note5: Check that the data of page: 6, address: 02 is "00". If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
Switch setting:
1) POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
Adjusting method:
Order Page Address Data
1 0 01 01
2 6 01 AF
3
4 6 02
5 F 66
6 F 6B
Note6: The adjustment data will be automatically input to page: F, address:
66 to 6C.
Processing after Completing Adjustments:
Order Page Address Data
1 6 01 00
2 0 01 00
Procedure
Set the data.
Set the data, and press PAUSE
button.
Check the laser light is output.
Check that the data is "01".
(Note6)
Check that the data is "10" to
"FF".
Check that the data is "15" to
"20".
Procedure
Set the data, and press PAUSE
button.
Set the data.
DCR-IP45/IP45E/IP55/IP55E
5-31