Handling; Assembly Information; Mounting Conditions - Viega Prevista Dry Instructions For Use Manual

3 Handling

3.1

Assembly information

3.1.1

Mounting conditions

Suitable walls
Construction height
Water connection
Actuation versions
Prevista Dry WC element height-adjustable after installation by the installer
Masonry walls
n
Concreted walls
n
Metal support profiles
n
Prevista Dry Plus pre-wall constructions
n
The wall constructions must comply with the regulations in section
Ä „Regulations from section: Fields of application / Mounting condi‐
tions" on page 6.
The WC element may only be mounted on even wall surfaces.
With the construction height, the marked height of the upper edge of
the finished floor must be observed.
The WC element has an R ½ inch water connection.
The WC element can be extended by a remote flush actuation or by an
electronic actuation, as well as by sensitive flush plates. The cables for
these electrical actuation versions must be laid in front of the cladding.
The corresponding empty pipe is required when preparing the remote
flush actuation.
Handling
10 from 29