Octave Phono Module Manual page 32

6.1. Output OUT 1: RCA standard
Specification
max. Output Voltage Fix Output
max. Output Voltage variable Output
Output Resistance Fix Output
Output Resistance variable Output
Signal to Noise Ratio
Regulated Variable Output
The regulated Output of the OUT 1 module is suitable for headphone amplifiers or analog-to-digital
signal processing.
This Output is limited for directly driving a power amplifier, as the maximum output level is in the
line level range. Additionally, this Output is not optimized for highly capacitive loads, which is often
the case with short signal cables for power amplifiers.
Unregulated, Fixed Output
The fixed (FIX) Output is recommended for the connection to preamplifers or integrated amps.
The average output level is the same value as that of a CD Player. The regulated and the unregu-
lated Outputs are both muted during the warm-up and the auto-muting phase.
Static Noise Level Variable Output Input, Volume Regulator "0"
The bandpass reading of the signal-to-noise ratio depicts the exceptionally low noise floor of
the Ouput Stage.
6. OUTPUTS
7 V RMS
7 V RMS
300 Ohm
300 Ohm
- 120 dB  variable Output
33