Lcd Operation - CyberPower OLS6000E User Manual

Then LCD will show the default UPS status summary screen after UPS
finishing self-test.
3) By pressing button
beep for 1s, UPS starts to turn on.
4) A few seconds later, the UPS turns into Battery mode. If the mains power
comes back, the UPS will transfer to Line mode without output interruption of
the UPS.
Turning off UPS with mains
1) To turn off the inverter of UPS by pressing button
than 3s and the buzzer will beep for 3s. The UPS will turn into Bypass mode at
once.
2) When completing the above action, UPS output voltage is still present. In order
to cut off the UPS output, simply cut off the mains power supply. A few
seconds later, LCD display shuts down and no output voltage is available from
the UPS output terminal.
Turning off UPS without mains
1) To power off the UPS by pressing button
and the buzzer will beep 3s. The UPS will cut off the output at once.
2) A few seconds later, LCD shuts down and no voltage is available from the UPS
output.

5.3. LCD Operation

Except the default UPS status summary screen, the user could get more useful
information about UPS current status, old events which ever occurred, UPS own
identification, and could change the settings to fit the user own requirements,
optimize the function of UPS.
continuously for more than 1 second，the buzzer will
：
：
16
continuously for more
continuously for more than 3s,