Subscribe to Our Youtube Channel
Related Manuals for CyberPower OLS1000E
Summary of Contents for CyberPower OLS1000E
- Page 1 User’s Manual OLS1000E/EXL OLS1500E/EXL OLS2000E/EXL OLS3000E/EXL CyberPower Systems Inc. www.cpsww.com K01-C000036-00...
-
Page 2: Important Safety Instructions
Connect the ground wire prior to connecting the line BATTERIES AND THE REQUIRED PRECAUTIONS. KEEP wires! UNAUTHORIZED PERSONNEL AWAY FROM BATTERIES! CAUTION! Do not use an improper size power cord as it may Copyright © 2012 CyberPower Systems, Inc. - Page 3 UNPACKING USB communication cable Input power cord Output power cords x2pcs User’s manual PowerPanel® Business Edition software CD Phone line Copyright © 2012 CyberPower Systems, Inc.
-
Page 4: Installing Your Ups System
This UPS is equipped with an auto-charge feature. When the power cord). The in/out power cord MUST be grounded. UPS is plugged into an AC outlet, the battery will automatically charge, even when the unit is switched off. Copyright © 2012 CyberPower Systems, Inc. -
Page 5: Basic Operation
11. EPO (Emergency Power Off) Connector Enable Power-Off in emergency from a remote location. 12. AC Input Inlet Connect the AC Power cord to a properly wired and grounded outlet. 13. Output Terminal Block OLS3000E/EXL Connect to your equipment. Copyright © 2012 CyberPower Systems, Inc. - Page 6 Replaceable fuse is accessible from the rear panel. It must be done by qualified personnel. 3. Output Connector Use this output Connector to connect the Battery module to the Power module or to the next Battery module. BPSE36V45A BPSE72V45A Copyright © 2012 CyberPower Systems, Inc.
- Page 7 Step 2: Use the battery cable of the Battery module to connect the Battery module to the Power module. Step 3: Rotate the battery cable retention bracket and tighten the two screws to fix battery cable. Copyright © 2012 CyberPower Systems, Inc.
- Page 8 Step 3: Use the battery cable to connect the 2 Battery module to the 1 Battery module. Step 4: Rotate the battery cable retention bracket and tighten the two screws to fix battery cable. Copyright © 2012 CyberPower Systems, Inc.
- Page 9 FAULT: This icon appears if there is a problem with the UPS. Please refer to “Event ID Descriptions”. Copyright © 2012 CyberPower Systems, Inc.
-
Page 10: Button Operation
Switch to bypass mode: When the main power is normal, ENTER/▲ + ESC/▼ press these two buttons simultaneously for 5 seconds, then UPS will enter to bypass mode. *) If utility power is connected，UPS will keep charging but cut off output. Copyright © 2012 CyberPower Systems, Inc. -
Page 11: Lcd Setup Functions
Press the “ENTER” button to select the parameter you want. Press the “ESC” button to cancel and exit setting mode. Press the “ENTER” button to save all the settings you just do and exit setting mode. Copyright © 2012 CyberPower Systems, Inc. -
Page 12: Silencing Audible Alarms
Note: Some audible alarms (Over Temperature, Fan Fail, etc.) can’t be silenced. MANUAL BATTERY TEST Press the “ENTER” button simultaneously for 5 seconds to enter UPS self-testing while in AC mode, ECO mode, or converter mode. Copyright © 2012 CyberPower Systems, Inc. -
Page 13: Maintenance
Only use replacement batteries which are Please refer to the front side of the UPS for the model certified by CyberPower Systems. Use of incorrect battery number of the correct replacement batteries. For battery type is an electrical hazard that could lead to explosion, fire, procurement, log onto www.CPSww.com, or contact your... -
Page 14: Technical Specifications
Operating Relative Humidity 20 to 90% Non-Condensing Management On-Device Features Self Test, Auto-Charge, Auto-Restart, Auto-Overload Recovery Connectivity Ports (1) Serial Port (RS232), (1) USB Port, SNMP/HTTP Capable (1) Expansion Port (With optional RMCARD 302) Copyright © 2012 CyberPower Systems, Inc. - Page 15 Business Edition Physical D×W×H = 15.51 x 5.94 x 8.86in. D×W×H = 16.38 x 7.72 x 13.28in. Dimensions (394×151×225 mm) (416×196×337 mm) 28.9/17.0lbs 33.7/17.2lbs 52.5/26.9lbs 62.2/27.8lbs Net Weight (13.1/7.7Kg) (15.3/7.8Kg) (23.8/12.2Kg) (28.2/12.6Kg) Safety Conformance Approvals Copyright © 2012 CyberPower Systems, Inc.
-
Page 16: Troubleshooting
2. Contact CyberPower for repair. CyberPower Systems Inc. www.cpsww.com © Entire contents copyright 2012 CyberPower Systems Inc., All rights reserved. Reproduction in whole or in part without ® ® permission is prohibited. PowerPanel Business Edition and PowerPanel Personal Edition are trademarks of CyberPower Systems Inc.
Need help?
Do you have a question about the OLS1000E and is the answer not in the manual?
Questions and answers