Fire Safety - Quell QPI9010 Manual

0475-7214-06_QPI9010(130417):_

Fire Safety

WARNING: PLEASE READ CAREFULLY AND THOROUGHLY
• Australian Standard AS 1670.6 states the purpose of
installing smoke alarms is to provide early warning of a
potentially life threatening condition and provide the
maximum possible exit time.
• Smoke alarms are devices that can provide early warning of
possible fires at a reasonable cost; however, alarms have
sensing limitations. Ionisation sensing alarms may detect
invisible fire particles (associated with fast flaming fires)
sooner than photoelectric alarms. Photoelectric sensing
alarms may detect visible fire particles (associated with slow
smoldering fires) sooner than ionisation alarms. Home fires
develop in different ways and are often unpredictable. For
maximum protection, Chubb recommends that both
Ionisation and Photoelectric alarms be installed.
• If the alarm is located outside the bedroom or on a different
floor, it may not wake up a sound sleeper.
• The use of alcohol or drugs may also impair one's ability to
hear the smoke alarm. For maximum protection, a smoke
alarm should be installed in each sleeping area on every
level of a home.
• Smoke alarms must be tested regularly to make sure the
batteries and the alarm circuits are in good operating
condition.
• Smoke alarms cannot provide an alarm if smoke does not
reach the alarm. Therefore, smoke alarms may not sense
fires starting in chimneys, walls, on roofs, on the other side
of a closed door or on a different floor.
• Although smoke alarms can help save lives by providing an
early warning of a fire, they are not a substitute for an
insurance policy. Home owners and renters should have
adequate insurance to protect their lives and property.
• Don't return to your home until the fire officials say that it is
safe to do so.
3
2015.5.22 2:12 PM Page
14