^W Z d ,KZ/KEd > &>h dZD/E >^ /E^d >> d/KE KWd/KE^
IMPORTANT -
Make sure there is a minimum downward slope towards the outside of 1 cm per metre of duct length.
If the condensate collection kit is installed, the discharge duct must slope down towards the boiler.
N.B.:
For the C52 type, do not fit the flue and air duct terminals on opposite walls of the building.
If the discharge duct is longer than 6 metres, install the condensate collection kit, supplied as an accessory, near the
boiler.
^W Z d sZd/ > &>h /E^d >> d/KE KWd/KE^
INSTRUCTIONS FOR FITTERS
/DE^/KE^ K& ^W Z d Khd>d^
L max = 10 m
L max = 12 m
L1 max = 8 m; L2 max = 15 m
L max = 11 m
15
7222863.02 - en