Makel MSA-CM Series User Manual page 37

Table 9: Shutter and Blinds' Alarms configurations page description.
Parameter
Use rain alarm?
21 Position for rain alarm
21 Alarm active if
21 Status after alarm
Use wind alarm?
22 Position for rain alarm
22 Alarm active if
22 Status after alarm
a) Positions at Alarm
The position the shutter and blinds should assume when a specific alarm occurs can be set in "Position
for [rain/wind] alarm". It's possible to set it not to react when the alarm occurrence is givin by setting
the parameter to "Maintain"; set it to "closed" (shutter at 100% and blinds at 180°); set it to "opened"
(shutter at 0% and blinds at 0°); or to the position defined in a certain scene.
21 Visible if "Use rain alarm?" is "Yes".
22 Visible if "Use wind alarm?" is "Yes".
User's Manual
Description
Defines if the rain alarm is to be used.
Defines the behavior of the device
when rain alarm is triggered.
Defines the polarity of the alarm signal
(active if '1' or active if '0').
Defines the behavior of the device in
pos-alarm.
Defines if the wind alarm is to be used. Possible values:
Defines the behavior of the device
when wind alarm is triggered.
Defines the polarity of the alarm signal
(active if '1' or active if '0').
Defines the behavior of the device in
pos-alarm.
4 Detailed Functions Description
Values
Possible values:
*No
Yes
Possible values:
*Maintain
Close
Open
Scene [1...32]
Possible values:
*On
Off
Possible values:
*Maintain
Previous status
Theoretical status without alarm
Close
Open
*No
Yes
Possible values:
*Maintain
Close
Open
Scene [1...32]
Possible values:
*On
Off
Possible values:
*Maintain
Previous status
Theoretical status without alarm
Close
Open
Page 37