O[X]-[X+1]: General - Makel MSA-CM Series User Manual

4.3.1 O[x]-[x+1]: General

The COs involved with general function of shutter and blinds control are:
[input] "Move Up / Down": Controls the movement direction;
[input] "[Slat Angle |] Stop Up / Down": [Steps the blinds in certain direction]
stops the movement;
[input] "Shutter Position (%)": Sets the shutter to a specific position
[input] "Blinds [Position (%)/Angle (°)]": Sets the blinds to a specific
[position/angle];
[input] "Jamming": Blocks the channel's communication with remaining COs;
[output] "Shutter Position Indication": Informs about the Shutter's current
position;
[output] "Blinds [Position/Angle] Indication": Informs about the Blinds'
current [position/angle];
[output] "Up Status Indication": Informs about the Up movement status ("True" if
moving up, "False" otherwise);
[output] "Down Status Indication": Informs about the Down movement status
("True" if moving down, "False" otherwise);
In Figure 10 it's shown the General configurations page's defaults for Shutter and Blinds pair of channels,
and further detailed description is given in the Table 7.
17 For this to work correctly the parameters "Time for complete [up/down] movement (s)" have to be correctly
set.
User's Manual
4 Detailed Functions Description
17
;
Page 29