Makel MSA-CM Series User Manual page 16

Figure 2: Channel's General configurations' page.
Table 4: Parameters in Channel's General configurations page.
Parameter
Use Timer?
7 Timer (default value)
7 Timer operation mode
7 Allow timer interruption with
Stop?
7 Consecutive presses multiply
time (within 10s)?
7 Visible if "Use Timer?" is set to value different than "Not used".
User's Manual
Description
Selects if the timer functionalities are to
be activated and how.
The length of the delay time.
Defines if the timer start triggers an On or
Off status.
Defines if the timer can be stopped after
starting by sending Stop message.
Defines if the delay time can be
multiplied per n by send multiple Start
messages within 10 seconds.
4 Detailed Functions Description
Values
Possible values:
*Not used
Use (normal Start=1; Stop=0)
Use (inverted Start=0; Stop=1)
Possible values:
1s, ... *10s, ... 1min, 1min 15s, ....
2min, 3min, ... 15min, 20min,
... 1h, 2h, ... 1day
Possible values:
*On
Off
Possible values:
*No
Yes
Possible values:
*No
Yes
Page 16