Shutter And Blinds - Makel MSA-CM Series User Manual

4.3

Shutter and Blinds

Here are explained the configurations for each channel in case it is chosen to Shutter and Blinds function.
All the channels working as Shutter and Blinds have similar configurations. Whenever from the General
configurations' page a pair of channels is set to "Shutter and Blinds" function, in the tabs list (left side)
three new tabs per pair of channel will expand:
O[x]-[x+1]: General
•
O[x]-[x+1]: Scenes
•
O[x]-[x+1]: Alarms configurations
•
Figure 9: Shutter and Blinds control explanation.
In Figure 9 it's exposed the control of Shutter and Blinds. For initiating the down movement first the
blinds will go to 180°, just after that the down movement occurs; for the up movement first the blinds go
to 0°, just after the up movement is initiated. It's supposed the shutter and blinds actuator to be controlled
via two lines. All the position related measures are time based, which may not give good precision in
some cases, however most electric shutter and blinds don't provide means of feedback.
In next each of the configuration pages is going to be explained in more detail, as well some working
examples will be presented.
User's Manual
4 Detailed Functions Description
Page 28