Makel MSA-CM Series User Manual page 33

4 Detailed Functions Description
Figure 12: Example of shutter and blinds operation.
b) Channel status after system start / power recover
The position of each channel when the system is (re)started, for example after a power failure, can be
defined by setting the parameter "Status after system start" to the desired value. If this parameter is set
to "Last stored position", at power failure the device attempts to save the channel's current positions for
shutter and blinds and, in case of success, when power is restored the device will set the saved values; it's
possible to set the channel to close (shutter at 100% and blinds 180°) when the system (re)starts or to
User's Manual Page 33