O[X]-[X+1]: Scenes - Makel MSA-CM Series User Manual

open (shutter at 0% and blinds 0°) by setting the parameter to "Close" or "Open" respectively; if specific
positions for shutter and blinds are desired then the scenes must be used (see 4.3.2).
c) Jamming
The directly related COs are:
[input] "Jamming": control of the jamming;
The channel may additionally be blocked via "Jamming" CO it "Jamming usage" is set to be used. It
can be blocked if "Jamming" CO receives "TRUE" (parameter set to "If '1'") or blocked if
"Jamming" CO receives "FALSE" (parameter set to "If '0'").
It's also possible to limit the time extension for which the channel remains blocked. This is is done the
setting "Use Time Limited Jamming?" to "Yes" and by selecting the duration in the parameter
"Duration".
d) Channel status after overriding operations
Manual operation, priority and jamming are considered overriding operations since they impose a certain
output status. The status the output takes when any of those overriding operations is ended can be defined
in the parameters "Status after [Manual Mode operation/Priority operation/jamming]". Setting this
parameter to "Maintain" causes the channel to keep that status that was imposed by the overriding
operation; if the parameter is set to "Previous status", when the overriding operation terminates the
channel's will set the sutter (and blinds) to the status just before the time the overriding operation starts;
setting the parameter to "Close" causes the shutter (and blinds) to go to closed status (shutter 100% and
blinds 180°) when the overriding operation terminates; setting the parameter to "Open" causes the the
shutter (and blinds) to go to opened status (shutter 0% and blinds 0°) when the overriding operation
terminates; by chosing "Theoretical status without [manual/priority/jamming]" causes the channel's
output to go to the status it would be in case the overriding operation didn't occur.

4.3.2 O[x]-[x+1]: Scenes

The COs related with scenes functionality are:
[input] "Scene Control": Controls the scenes;
Every Shutter and Blinds channel can have a specific position (for the shutters and for the blinds) for a
certain scene number. All the Channels have available from "Scene 1" to "Scene 32" for configuration.
User's Manual
4 Detailed Functions Description
Page 34