Cleaning The Detector; Cleaning The Plastic Components - Carestream DRX-Revolution Hardware Manual

Caution
Do not immerse the equipment in liquid.

Cleaning the Detector

•
Refer to the documentation accompanying the detector for information on
cleaning the detector or detector battery wall.

Cleaning the Plastic Components

Most of the DRX-Revolution Nano Mobile X-ray System exterior is plastic and painted carbon
fiber.
Important
Turn off the power to the cart before cleaning.
Caution
Do not attempt to clean inside the machine or to remove any panels.
Caution
Do not use aerosol sprays directly on or over the machine.
Never use abrasive cleaning products such as abrasive sponges, steel wool pads,
abrasive powdered cleaners, or harsh detergents. Plastic surfaces are easily scratched.
This can ruin the finish. Do not use glass cleaner on plastic. While the damage may not
be immediately visible, over time, glass cleaners will leave the plastic with an
appearance that doesn't appear to be clean. Instead, use sponges, soft cloths, and mild
detergents when cleaning plastic.
With a damp, lint-free cloth or an electrostatic dust cloth, wipe the panels, handle,
bins, knobs, and wheels. When moistening a cloth, it is best to use a solution of 70%
isopropyl alcohol. You can also use lint-free foam swabs moistened with rubbing
alcohol or water for wiping hard-to-reach areas. Finish cleaning with a dry, lint-free
cloth to wipe off any moisture.
5-4
Maintenance and Safety Information
AF0118 | 2018-03-27