Operating the System
Power Button Operation
The system uses a "soft-off" style power button, which may operate differently than
other Carestream products. Pressing the power button to shut down the system will
put the system into a standby, low-power consumption state. Mains battery charging
and brake release using the buttons on the handles remain available in standby.
Put the
When the system is ON, press and release the power button to put the system into
system into
standby mode.
standby
mode using
the power
This will disable detector battery charging.
button
Start up the
system using
When the system is OFF, press and release the power button to start up the system.
the power
button
When the system is ON, press and hold the power button down for at least four
seconds.
Re-boot the
system using
the power
button
Before performing the system reboot using the power button, attempt to reboot the system
using the Quick Menu in DirectView.
AF0118 | 2018-03-27
Note
Note
4-3