Quantum StorNext QM1200 Replacing Manual page 7

StorNext QM1200/QS1200/QS2400 Expansion Unit - Replacing a Power-Fan Canister
Yes – Click the Recovery Guru toolbar button in the Array Management Window, and complete the recovery
—
procedure. If the problem has not been resolved, contact your Customer and Technical Support
representative.
No – Go to step 10.
—
10. Remove the antistatic protection.
11. Gather support data on your updated storage array through one of the following methods:
Use the storage management software to collect and save a support bundle of your storage array. From the
—
Array Management Window, select Monitor >> Health >> Collect Support Data. Then name and specify a
location on your system where you want to store the support bundle.
Use the CLI to run the save storageArray supportData command to gather comprehensive support
—
data about the storage array. For more information about this command, refer to Command Line Interface and
Script Commands. Running this command can temporarily impact performance on your storage array.
Quantum Corporation
- 5 -
April 2015