BIOS Setup
Power
▶ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off]
[Power On]
[Last State]
▶ Deep Sleep Mode
The setting specifies the Deep Sleep power saving mode. S5 is almost the same
as G3 Mechanical Off, except that the PSU still supplies power, at a minimum,
to the power button to allow return to S0. A full reboot is required. No previous
content is retained. Other components may remain powered so the computer can
"wake" on input from the keyboard, clock, modem, LAN, or USB device.
** Advanced Resume Events Control **
▶ OnChip GbE/USB
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onchip Gigabit Ethernet or USB is detected.
3-20
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status
before power failure or interrupt occurred.