Hardware Specifications - Infortrend EonStor GSe Pro 208 Hardware Manual

Hardware specifications

Specification summary
Form factor
Controller
Cache memory
Host ports
USB ports
Drive interface
Maximum number of drives
Expansion enclosure supported model
Drive advanced features
Supported drives
RAID functionality
viii
5-bay EonStor GSe Pro 205 desktop
8-bay EonStor GSe Pro 208 desktop
Single controller
- 8 GB DDR4 (2 x 4 GB)
- 16 GB DDR4 (2 x 8 GB)
- 32 GB DDR4 (2 x 16 GB)
Note: The installed default memory varies by model, region,
and other factors. Contact your local sales representative for
details.
Onboard Gb/s ports:
- 2 x 1 Gb/s iSCSI ports
- 2 x 10 Gb/s iSCSI ports (SFP+)
More host options:
- 2 x 10 Gb/s iSCSI ports (RJ-45)
- 2 x 16 Gb/s Fibre Channel ports*
- 4 x 1 Gb/s iSCSI ports (RJ-45)
- 4 x 10 Gb/s iSCSI ports (SFP+)
- 4 x 8 Gb/s Fibre Channel ports*
* Supports point-to-point and switch mode
2 x USB 3.1 Gen2
2 x USB 3.0
6 Gb/s SATA
GSe Pro 205
- System: 5
- Expansion: 32
GSe Pro 208
- System: 8
- Expansion: 32
JB Pro 208
S.M.A.R.T. support, automatic bad sector
reassignment, dedicated bandwidth to each connected
drive
2.5-inch SATA SSD
3.5-inch SATA SSD
NOTE: Refer to the Compatibility Matrix for the latest
compatibility details.
Global, dedicated, or enclosure hot spare
RAID level supported: 0, 1 (0 + 1), 3, 5, 6, 10, 30, 50,
60
Online expansion:
- Adding new drives
- Copying and replacing drives of larger capacity
RAID migration:
- Configurable stripe size and write policy per system
- Intelligent drive handling
• In degraded mode: skips irreparable blocks to
continue rebuild
• In normal operation: data-block verification and
repair
(See next page)