4.1.4
Restoring the default settings
Before restoring the default settings, you must create a list of existing ID/LUN mapping information.
Restoring your system erases the ID/LUN mapping associations (e.g. logical drive associated with host
ID/LUN).
To restore the default settings:
1.
Stop all input/output activities.
Save the current configuration using Export NVRAM.
2.
3.
Turn off the system.
4.
Insert the paper clip to the Restore Default button, then press and hold until the Restore Default
LED lights up.
NOTE: During restoration, the Restore Default LED lights up in amber. It lights up in green after the
restoration process is complete.
5.
In the firmware, use Import NVRAM from reserve space or Restore NVRAM from files to restore
your previous settings. ID/LUN mapping configuration is restored after applying your previous
settings.
4-8
Chapter 4: System maintenance