Cleaning The Scan Window; Trouble Shooting - Zebex Z-8082 Lite User Manual

U ' M
SER S ANUAL

Cleaning the Scan Window

The scanner is designed for long-term trouble-free operation and rarely requires any
maintenance. Only an occasional cleaning of the scanner window is necessary in order to
remove dirt and fingerprints.
Wipe the scan window with a soft lint-free cloth and a non-abrasive cleaner to avoid
scratching and damaging the scan window. The scan window may be cleaned while the
scanner is running.

Trouble Shooting

This section contains information about how to solve problems that you may encounter
when operating the scanner. However, before referring to the tips, make sure that the
scanner is installed as instructed in this manual and that all cables are properly connected.
If the problem remains, please contact your dealer.
Problem
The scanner is on but cannot
read barcodes.
2D Image On-Counter Scanner 2
Diagnostic Tips
The scanner window is dirty. Clean the scanner window as
described in the Maintenance section.
The presented barcode type is not enabled. Select the barcode
type in the Programming Guide.
The host disables the scanner.
The barcode type you presented to the scanner is not
supported.
16