Related Manuals for Zebex Z-6170
Summary of Contents for Zebex Z-6170
- Page 1 Z-6170 Hands-Free Dual-Laser Omnidirectional Scanner Service Guide Revision History Changes to the original manual are listed below: Version Date Description of Version Jan. 8, 2014 Initial release...
-
Page 2: Preface
All trademarks mentioned herein, registered or otherwise, are the properties of their various respective owners. This manual is in A4 format. Please check your printer setting before printing it out. Z-6170+ Service Guide 2 / 10... -
Page 3: Table Of Contents
ERVICE UIDE Table of Contents Preface..................................2 Important Notice ..................................2 Table of Contents................................3 Introduction ...................................4 Product Overview...................................4 Scanner Parts ..................................6 Take Apart ..................................7 Before You Start ..............................7 Important Instructions ..............................7 Tools to Prepare ..................................7 Z-6170+ Service Guide 3 / 10... -
Page 4: Introduction
Furthermore, it is programmed with multiple beeper tones and barcode data edition function for different applications. Product Overview Button Front Scan Window Good Read Buzzer Adjustable Stand Interface Stand Connector Suction Cup Z-6170+ Service Guide 4 / 10... - Page 5 Power Link Connect the external AC/DC power adaptor into the power jack interface on the power link cable. And the interface connector provides the cable communication between the scanner and host terminal Z-6170+ Service Guide 5 / 10...
-
Page 6: Scanner Parts
Speaker cover (Gray) 10K-028050-410 Speaker 684-100000-493 Dust cover 86A-617002-707 Center mirror base 616-617003-202 Phone jack board assembly 031-008006-520 6Pins FFC M2-6.0 mm, round, Philips head 521-003000-6R0 Self-tapping screw M3-10.0 mm round, Trox head 521-604000-012 Z-6170+ Service Guide 6 / 10... -
Page 7: Take Apart
• Philips screwdriver. • Trox screwdriver. Please follow these steps to take apart Z-6170+. Remove the screws from the back case using a Trox screwdriver as circled in red. Remove the front case of the scanner. Z-6170+ Service Guide 7 / 10... - Page 8 ERVICE UIDE Carefully remove the cable circled in red. Remove the screws circled in red using a Philips screwdriver Disassemble parts from front case. Z-6170+ Service Guide 8 / 10...
- Page 9 Remove the screws from the main board as circled in red using a Philips screwdriver. Separate the phone jack board and disconnect the cable from the main board connector as circled in red. Remove the 2 screws circled in red using a Philips screwdriver. Z-6170+ Service Guide 9 / 10...
- Page 10 ERVICE UIDE Carefully lift the main board and remove the FFC cable. 10. Remove the FFC cable from back case. Z-6170+ Service Guide 10 / 10...