Scan Test - Zebex Z-8082 Lite User Manual

Scan Test

1. With the scanner running (blue LED lights) and the host system on, try to scan
several known-good barcodes.
2. Check the results on the POS screen. If the scanner is reading okay, it is likely that
no further setup is necessary.
3. If the POS screen does not show the expected scans, please refer to the
Programming Guide.
1.
2.
7
If the scanner is connected to a USB for this test, it should read one
barcode, beep and then remain a red LED indicating light. This is
normal when the USB is not connected to a live host terminal.
If the scanner does not produce any beeps, or produces the wrong
beeps, or the LED does not light up, remove the power connection
and refer to the Troubleshooting section.
U ' M
SER S ANUAL
2D Image On-Counter Scanner