Important notices Thank you for purchasing the Z-3070 Series Handheld Barcode Scanner. To ensure years of reliable service, please read this Product Reference Manual carefully and use the scanner safely. Store this Product Reference Manual in a safe location where you can find it for future use.
Do not put the scanner directly under the sun or by any heat source. Do not use or store the scanner in a very humid place. Do not let the scanner drop or collide violently with other objects. Do not take apart the scanner without authorization. ZEBEX INDUSTRIES INC. All Rights Reserved.
Default values of decoding parameters........16 Program procedure ................17 System setting................... 18 General configuration ................ 19 Scanning mode selection (for laser scanner)......19 Scanning mode selection (for CCD scanner)......19 Data redundant check ..............20 Inter-message delay..............20 ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 5
Chinese post code parameters setting........42 UPC/EAN/JAN parameters setting..........43 Codabar/Monarch parameters setting......... 47 Code 128 parameters setting............48 UCC/EAN 128 parameters setting ..........49 Matrix 25 parameters setting............49 MSI/Plessy parameters setting ........... 50 ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 6
Appendix A - Code 39 full ASCII code table........77 Appendix A - Function key emulation..........79 Appendix B - Code 39 full ASCII barcode table ........ 80 Appendix C - Barcode samples............90 Appendix D - Quick settings .............. 91 ZEBEX INDUSTRIES INC. All Rights Reserved.
Z-3070 Series Handheld Barcode Scanner. Service information If you have any problem with the product, you may contact the ZEBEX representative in your region, or contact ZEBEX offices for customer care. Please provide the model number and serial number before contact ZEBEX for service.
ZEBEX web site at http://www.zebex.com.tw. If the information needed is not found to solve your problem either from the Product Reference Manual or ZEBEX web site, please contact ZEBEX customer services for support. ZEBEX INDUSTRIES INC. All Rights Reserved.
You can puzzle up your selections with the Z-3070 series to meet your applications for all kinds of purposes. Selections should be made when order according to follows: Z-3070/DC: scans with Dual CCD Engine;...
When power is on, the LED is RED. LED Indicator A barcode is successfully decoded when the LED indicates GREEN. The buzzer sounds when a barcode is Buzzer successfully decoded. Cable interface port For cable connecting. ZEBEX INDUSTRIES INC. All Rights Reserved.
Installing the Cable Plug the interface cable modular connector into the cable interface port on the bottom of Z-3070 Series handle, and twist the SR lock to the right to lock as shown: Different cables are required for different host. To change the scanner cable: 1.
3. Connect the right-angle connector of power supply into the power jack on the interface cable. Plug the other end of the power supply into an AC outlet. ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Connecting the scanner to a host The Z-3070 Series scanner supports RS-232C, keyboard Emulation, Wand Emulation, and USB interface to a host system. This section describes how to set up each of these connections.
Z-3070 CCD BARCODE SCANNER Keyboard Emulation Connection When configured for Keyboard Emulation input, the host accepts input from the scanner as keystrokes. The Z-3070 Series Scanner can perform Keyboard Emulation input using a keyboard interface cable and a male to female connecting cable.
1. Connect the USB interface cable to the bottom of the scanner, as described in Installing the interface Cable. 2. Connect the other end of the interface cable into the USB port on the host. ZEBEX INDUSTRIES INC. All Rights Reserved.
“dead zone”. You can tilt the scanner up to 65° forward or backward and achieve a successful decode. Simply practice quickly to find what tolerances to work within. ZEBEX INDUSTRIES INC. All Rights Reserved.
Z-3070/WA supports 2 scanning option. Refer to Programming and Setting for the specific barcode programming information. When power is on for the first time, Z-3070 Series Scanner is working in default scanning mode. You may change it to the appropriate mode.
Introduction Scanning a series of programming barcode labels can configure the Z-3070 series scanners. This allows decoding options and interface protocols to be tailored to a specific application. The configuration is stored in non-volatile memory and will not be lost by removing power from the scanner.
MATRIX 25 Barcode Identifier Code *For activation of barcode identifiers see page 54 DEFAULT VALUES OF KEYBOARD EMULATION PARAMETERS SETTING Function Default Values Keyboard type IBM PC/AT USA selection Message Enter/ carriage terminator Return ZEBEX INDUSTRIES INC. All Rights Reserved.
DEFAULT VALUES OF USB EMULATION PARAMETERS Function Default Values ¡ ° Keyboard Type US Keyboard ¡ ° Message Terminator Enter Note: For USB emulation, the configuration is only effective for the items with asterisk ( ¡ ° ). ZEBEX INDUSTRIES INC. All Rights Reserved.
Italian Pharmacy Transmit "A" Character Not transmitting Length Fix 10 digits MATRIX 25 Check digit Disable Note: The configuration of the items with asterisk ( ¡ ° ) is effective when being appointed in advance. ZEBEX INDUSTRIES INC. All Rights Reserved.
The label below should be scanned if the scanner is configured the first time. WAND EMULATION The reading of the “SHOW VERSION” label will be show firmware version. SHOW VERSION End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Alternate mode scanner will turn off for next pressing. This mode is similar to Auto scan mode, but double reading for the same barcode is Repeat mode prohibited if the scanner switch is pressed. ZEBEX INDUSTRIES INC. All Rights Reserved.
INTER-MESSAGE DELAY These series of scanners allow you to add a delay between two consecutive messages. This delay will be added before each data transmission. None 100 msec 500 msec 1 Second End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
This mode is only available when the scanner is working with code 39 labels. You are free to choose any character as the “ Send” command. Message Block End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Enable Store Disable GOOD READ BEEPER TONE SELECTION You can use this option to set frequency and / or duration of the buzzer after successful reading. Medium High Disable End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Z-3070 CCD BARCODE SCANNER Start of Configuration SOUND DURATION long(120 ms) Medium(50 ms) Short(20 ms) Very short(5 ms) *For Alpha-70 ,Z-3070 and SC-2070 Series only Medium and disable setting available, it’s hardware beeper control. End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
The RS-232C scanner supports four handshaking protocols. With these options of communication protocol, you can tailor the scanner to meet the requirement of most systems. HANDSHAKING PROTOCOL None RTS/CTS ACK/NAK Xon/Xoff ACK/NAK RESPONSE TIME SETTING 300 msec 2 sec End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration DATA BIT STOP BIT PARITY Even Mark Space None End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration MESSAGE TERMINATOR (FOR RS-232C TYPE ONLY) None CR/LF H Tab STX/ETX End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Choose the appropriate type of keyboard emulation by scanning the labels under the following labels. IBM AT PS/2 30-80 IBM 5550 IBM 5295 Terminal IBM XT IBM 5530-SC IBM 5530-ZC End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 38
APPLE MAC II( ¡ ° ) IBM 3477/3472 Terminal PS2/30/56 IBM 3477 Terminal (Without break code) NEC 5200(¡ ° ) Note: The configuration of the items with asterisk (¡ ° ) is optional. End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration KEYBOARD LANGUAGE SELECTION Germany French Spanish Italian Swiss Swedish End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration MESSAGE TERMINATOR (FOR KEYBOARD WEDGE USE) None Return /Enter Hor. TAB Execute KEYBOARD TYPE SELECTION Scan Code Mode Alt mode End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Function keys can be concatenated with input data as header and/or trailer. See table on page 75. CAPITAL LOCK ON/ OFF Select the suitable code to match your keyboard caps lock status. End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration Function key emulation (only for PC/AT) Numlock on/off 00H~1FH ASCII Code defined Alt-mode code Crtl+code End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
EMULATION SPEED SELECTION Medium Normal High Higher EMULATION DATA OUTPUT SELECTION The decoded data output logic level can be set to befit the external decoder. Black = High Black = Low End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration WAND EMULATION NARROW / WIDE RATIO End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Mac OS 8 and later, no additional software is needed since the USB driver support is built into this operating system. KEYBOARD TYPE US Keyboard International Keyboard MESSAGE TERMINATOR None Enter H Tab End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
READING CODE SELECTION Code 39 Enable Code 39 Disable Coda bar Enable Coda bar Disable UPC/ EAN/ JAN Enable UPC/ EAN/ JAN Disable ITF 2 of 5 Enable ITF 2 of 5 Disable End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 47
Start of Configuration READING CODE SELECTION (Cont’d) Chinese Post Code Enable Chinese Post Code Disable Code 128 Enable Code 128 Disable MSI Enable MSI Disable Code 93 Enable Code 93 Disable IATA Enable End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 48
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration READING CODE SELECTION (Cont’d) IATA Disable EAN- 128 Enable EAN-128 Disable MATRIX 25 Enable MATRIX Disable Italian Pharmacy Enable Italian Pharmacy Disable End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Z-3070 CCD BARCODE SCANNER Start of Configuration CODE 39 PARAMETERS SETTING CHARACTER SET Standard Code 39 Full ASCII Code 39 START/STOP CHARACTER TRANSMISSION CHECK DIGIT Calculate and Transmit Calculate but not Transmit End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Start of Configuration CODE 39 PARAMETERS SETTING (continued) CONCATENATION Enable Disable INTERLEAVED 2 OF 5 PARAMETERS SETTING Examples: Felting length 4 to 8 digits LENTGTH Scan:. Start of configuration End of configuration End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration CHECK DIGIT Calculate and Transmit Calculate but not Transmit CHINESE POST CODE PARAMETERS SETTING LENGTH Scan:. Start of configuration End of configuration End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration CHECK DIGIT Calculate and Transmit Calculate but not Transmit UPC/EAN/JAN PARAMETERS SETTING FORMAT EAN-8 or EAN-13 UPC-A and EAN-13 UPC-A and UPC-E End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 53
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration FORMAT (Continued) UPC-A UPC-E EAN-13 EAN-8 ADDENDUM 5 Characters 2 Characters 2 or 5 Characters End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 54
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration FORCE UPC-E TO UPC-A FORMAT FORCE UPC-A TO EAN-13 FORMAT TRANSMIT UPC-A LEADING CHARACTER End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 55
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration TRANSMIT UPC-A CHECK DIGIT TRANSMIT UPC-E LEADING CHARACTER TRANSMIT UPC-E CHECK DIGIT End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Start of Configuration TRANSMIT EAN-13 CHECK DIGIT TRANSMIT EAN-8 CHECK DIGIT CODABAR/ MONARCH PARAMETERS SETTING START/ STOP CHARACTER TRANSMISSION DC1~DC4 A, B, C, D a/ t, b/ n, c/ *, d/ e End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration CONCATENATION Enable Disable CODE 128 PARAMETERS SETTING FNC 2 CONCATENATION Enable Disable CHECK DIGIT Calculate and Transmit Calculate but not Transmit End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
The character FNC1 can be transmitted or not using these codes. FNC1 Character Transmitted FNC1 not Transmitted MATRIX 25 PARAMETERS SETTING Examples: Felting length 4 to 8 characters Scan. Start of configuration End of configuration End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Examples: Felting length 4 to 8 characters Scan:. Start of configuration End of configuration Double Check digit Calculate but not Transmitted Calculate but only first one Transmitted Calculated and both Transmitted End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 60
Double Check digit (Cont’d) Single Check digit Calculated but not Transmitted Calculated and transmitted PLESSY CODE SETTING Calculated and transmitted Calculate but not transmitted CHECK DIGHT Calculate and Transmit Calculate but not Transmit End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration ITALIAN PHARMACY PARAMETERS SETTING TRANSMIT "A" CHARACTER BARCODE LENGTH SETTING CODE 39 LENGTH SETTING CODE 93 LENGTH SETTING End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Start of Configuration CODE 128 LENGTH SETTING CODABAR LENGTH SETTING ISBN/ ISSN CONVERSION The function convents the UPC/EAN codes appearing on books and magazine not ISBN/ISSN format. ACTIVE ISBN/ ISSN INACTIVE ISBN/ ISSN End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
The series of scanners can transmit max.2-digit barcode identifier code for different types of barcodes. Use the labels to choose transmit or not transmit predefined barcode identifier code (ID’s are listed on page 14): Enable Disable End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
“AB” want for code mark then scan “A” and “B”. 4. Scan “Set” label. 5. Scan “ End of configuration” label. UPC-E UPC-A EAN-13 EAN-8 Chinese post code ITF 2 OF 5 End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 65
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Start of Configuration BARCODE IDENTIFIER CODE SETTING (Cont’d) Coda bar Code 39 Code 128 Code 93 MATRIX 25 End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
3. scan two barcode value from the full Truncate trailer ASCII code table(0~9) For example, if character 2 number header you want clear then scan ”0” and “2” 4. Scan” set” barcode 5. end of configuration End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
¡ · ¡ · 23¢ X Z-3071-LR/RF 20” 200mA@5.0V ¡ · ¡ · 53¢ X Z-3071-WA/TG 10” 200mA@5.0V ¡ · ¡ · 23¢ X Z-3071-LR/TG 20” 200mA@5.0V * Note: Based on UPC/EAN 100%, PCS=90 ZEBEX INDUSTRIES INC. All Rights Reserved.
Read/Write Electronic Optional: I code and Tag (For Tag Series) 24 Kbit / Sec. (Write and Read / Write Speed back of 2 Kbit > 1.5 sec) Read / Write Distance Up to 100mm ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 70
Inter-message delay, keyboard type and keyboard language. Serial Interface Type: ACK/NAK, Xon/Xoff, RTS/CTS, Weight 180g (excluding cable and connector) Case Material ABS plastic Cable Coiled cable, 3m when straightened Connector Type RJ-45 Phone Jack Connector ZEBEX INDUSTRIES INC. All Rights Reserved.
Character A pattern of bars and spaces which either directly represents data or indicates a control function, such as a number, letter, punctuation mark, or communications control contained in a message. ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 73
A barcode or symbols in which all spaces within the Code symbol are parts of characters. There are no intercharacter gaps in a continuous code. The absence of gaps allows for greater Information density. ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 74
Only numeric (0 to 9) and START/STOP characters may be encoded. LED indicator A semiconductor diode (LED – Light Emitting Diode) uses as an indicator, often in digital displays. The semiconductor uses applied voltage to produce light of ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 75
1. Light source (laser or photoelectric cell) - illuminates a barcode. 2. Photodetector – registers the difference in reflected light (more light reflected from space). 3. Signal conditioning circuit – transforms optical detector output into a digitized bar pattern. ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 76
Universal Product Code. A relatively complex numeric symbology. Each character consists of two bars and two spaces, each of which is any of four widths. The standard symbology for retail food packages in the United States. ZEBEX INDUSTRIES INC. All Rights Reserved.
Move the scanner closer to and barcode is incorrect. or further from the barcode. Symbol Is decoded, Scanner is not programmed Scan the appropriate host but not transmitted to for the correct host type. type barcode. the host. ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 79
Be sure editing options (e.g. UPC-E UPC-A Conversion) are properly programmed. Note: If after performing the checks, but the symbol still can’t be scanned, please contact your distributor or Zebex Industries Inc. for further technical support. ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER Customer support Support is provided when you contact ZEBEX Industries Inc Technical Support. Monday – Friday¡ G 8:30 AM to 6:00 PM, Taiwan Time Phone¡ G (886) 2 2218 2018 Fax¡ G (886) 2 2218 8670 E-mail¡...
2. The warranty period is not a result of an accident, physical damage and force of nature such as fire, floods, wars…etc. 3. ZEBEX INDUSTRIES INC. reserved the rights to or not to repair for the Out of Warranty products or the Insubstantial Warranty *.
ZEBEX INDUSTRIES INC. 2. It is necessary to have a RMA number for any items returning to ZEBEX INDUSTRIES INC.. In order to obtain a RMA number from the Customer Service Department, it must have following information ready:...
Page 83
5. After the customer has confirmed the RMA number sent by ZEBEX INDUSTRIES INC. The RMA will be sent back within 2 weeks upon receiving goods. 6. It is required the RMA number to be written on each shipping box.
The following user documentation is provided with your scanner: ¡ » Reference Manual for Z-3070 Series Relative Publications For the latest versions of the Z-3070 Series Reference Guide and Product Reference Guide, go to : http://www.zebex.com.tw for update. ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX A FUNCTION KEY EMULATION FUNCTION FUNCTION ASCII CODE 39 ASCII CODE 39 Home Down Left Backspace Enter(num) Right PgUp Enter PgDn Ctl(L) shift Alt(L) 5 (num) ZEBEX INDUSTRIES INC. All Rights Reserved.
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX B CODE 39 FULL ASCII BARCODE TABLE Start of Configuration (Up) (Ins) (Down) (Del) (Left) (Home) (Backspace) (End) (TAB) End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 90
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX B CODE 39 FULL ASCII BARCODE TABLE Start of Configuration (Enter)(num) 5 (num) (Right) (F1) (PgUp) (F2) (Enter) (F3) (PgDn) (F4) End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 91
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX B CODE 39 FULL ASCII BARCODE TABLE Start of Configuration shift(L) (F5) (F6) (ESC) (F7) Ctl (L) (F8) Alt (L) (F9) (F10) End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 92
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX B CODE 39 FULL ASCII BARCODE TABLE Start of Configuration (F11) " (F12) & End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 93
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX B CODE 39 FULL ASCII BARCODE TABLE Start of Configuration < > End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 94
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX B CODE 39 FULL ASCII BARCODE TABLE Start of Configuration End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 95
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX B CODE 39 FULL ASCII BARCODE TABLE Start of Configuration End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 96
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX B CODE 39 FULL ASCII BARCODE TABLE Start of Configuration End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 97
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX B CODE 39 FULL ASCII BARCODE TABLE Start of Configuration End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
Page 98
OUTLINE FOR PRODUCT REFERANCE MANUAL Z-3070 CCD BARCODE SCANNER APPENDIX B CODE 39 FULL ASCII BARCODE TABLE Start of Configuration End of Configuration ZEBEX INDUSTRIES INC. All Rights Reserved.
APPENDIX D QUICK SETTINGS 1. Quick Settings for Keyboard Wedge Mode Program Reset PC/AT 2. Quick Settings for RS 232 Mode Program Reset RS-232C 3. Quick Settings for German Language Keyboard Program German Keyboard ZEBEX INDUSTRIES INC. All Rights Reserved.