Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zebex Z-6070 Series
Summary of Contents for Zebex Z-6070 Series
- Page 1 P/N: MUL-53249-01...
- Page 2 User ' s Manual Z-6070 Series Hand Free Laser Scanner...
- Page 3 For CE-countries: - The Z-6070 is in conformity with the CE standards. Please note that a ZEBEX CE-Marked power supply unit should be used to conform to these standards. Radio and television interference Operation of this equipment in a residential area can cause interference to radio or television reception.
-
Page 4: Important Notice
Important Notice ZEBEX INDUSTRIES INC. MAKES NO WARRANTY OF KIND WITH REGARD THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PROPOSE. ZEBEX INDUSTRIES INC. SHALL NOT BE LIABLE FOR ERRORS CONTAINED... -
Page 5: Table Of Contents
TABLE OF CONTENTS Introduction ................. 1 Unpacking ................2 Scanner Outline and Indicator..........4 Power Connection............... 6 Verify the Scanning Operation..........7 Template Installation (if required) ........8 Connecting the Scanner............ 10 RS-232 interface............10 Keyboard wedge............11 USB Interface ............12 Wand emulation............ -
Page 6: Introduction
Introduction Z-6070 is the first dual-laser presentation scanner in the world with numerous record-breaking key features. Its pioneered application of dual laser diodes drastically enhance scanning power by doubling up scan lines, broadening scan angle and intensifying scan pattern across scan field. -
Page 7: Unpacking
Unpacking When you open the Z-6070 containing box, please check to make sure everything you ordered is present and check if there is any damage during shipment. If you find any damages or missing components, please report immediately to your sales representative. Open the box, in it should contain: Figure 1 Item... - Page 8 100~240V United Kingdom Applied Regions: PWO-52213-UK Hong Kong, Malaysia, Singapore, UAE, UK 100~240V Applied Regions:New PWO-52214-AU Zealand, Australia For special power requirement, please contact your dealer, distributor or directly contact ZEBEX MUL-53249-xx Reference manual MUL-53243-xx Programming Guide MET-01531-FP base template /Screw(optional)
-
Page 9: Scanner Outline And Indicator
Scanner Outline and Indicator Figure 2 Button Wake up scanner When the scanner enters into the sleep mode, pressing this switch can wake the scanner up. The sleep mode feature can be programmed using the menu labels from the Programming Guide. NOTE: The default value for the sleep mode time-out is set to 10 minutes after laser sleep, 30... - Page 10 Beeper tone When the scanner is sitting in the selection adjustable stand, press down this button for a duration of time (5 sec), it will automatically change the beeper volume. A red LED indicates the scanner is ready to read a barcode while a green LED indicates a good read.
-
Page 11: Power Connection
The host system should be capable to supply a minimum of 300mA of current @ 5VDC. In order to obtain the best steady operation, ZEBEX recommends using the external power supply provided with the Z-6070 when connect to keyboard wedge or... -
Page 12: Verify The Scanning Operation
Verify the Scanning Operation Before installing your Z-6070 scanner, please follow the procedures below. This will lead to proceed for scanning properly. Connect the modular plug of the power link cable into the back of the scanner. Plug the DC plug of the power adaptor into the jack on the power link cable. -
Page 13: Template Installation (If Required)
Template installation (if required) The adjustable stand has non-skid rubber feet on the bottom to prevent unnecessary slippery occurred, but for some special application, it may need to be kept fixed permanently on the counter top. The base template can be mounted on a flat counter top. Put the template at where you want to fix the stand. - Page 14 Turn the stand about 30 clockwise to properly clip the stand onto the template. Figure 5...
-
Page 15: Connecting The Scanner
Connecting the Scanner The Z-6070 scanner connects to a host POS terminal via a power link interface cable. The cable connects to the scanner with a modular connector and to the host terminal with the connector required by the host. There are four type interface can support by the scanner, 1. -
Page 16: Keyboard Wedge
2. Keyboard Wedge When configured for Keyboard Emulation input, the host accepts input from the scanner as keystrokes. The Z-6070 Series Scanner can perform Keyboard Emulation input using a keyboard interface cable and a male to female connecting cable. Make sure that the power of your computer system is switched off. -
Page 17: Usb Interface
3. USB interface Connect USB cable to a host. The scanner automatically detects a USB host and defaults to the HID keyboard interface type. Make sure that the power of your computer system is switched off. Plug the interface cable modular into the scanner port until a firm “Click”... -
Page 18: Wand Emulation
Use only AC/DC power adaptor approved for the Z-6070 scanner that ordered from ZEBEX. Usage of other power supplies may cause damage to the product, and the damage is not covered by the factory... -
Page 19: Replacing The Interface Cable
The cable is designed to be field replaceable, Replacement cable can be obtained from ZEBEX, or an authorized distributor. To replace the cable, the following steps should be followed. -
Page 20: How To Scan
How to Scan The Z-6070 is an omni-directional presentation scanner with an 8 directional scan field with a 32 lines scan pattern. The scan volume extends approximately 8”(20cm) in front of the scan windows. Barcode labels can easily be read by presenting towards to the scanning window. -
Page 21: Fixed Mode Scanning
Fixed mode scanning In this mode, the scanner can read barcodes either in the sweep or presentation to accommodate different user styles. The adjustable stand allows to be tilted forward and backwards in position when scanning various sized objects, as show in figure 11 ~ 16. Figure 11 - scanner position adjustment Figure 12 - scanner in the stand... - Page 22 Figure 13 - With stand Figure 14 - Without stand Figure 15 - “Presentation” scanning...
-
Page 23: Hand Held Mode
Figure 16 - “Sweep”Scaning Hand held mode The Z-6070 is also a handheld scanner, with a easy lift from its adjustable stand, when scanning large or bulk items. To use the scanner in hand held mode, remove the scanner from stand and present the scanner’s front scan window towards to the barcode to be scanned. -
Page 24: Single Line Mode
Single-line mode In this mode the scanner can emit a single line pattern for user to handheld scanning of hard to read or multiple barcodes on one object, sales clerks could switch it to single line scan option simply by pressing one button. Pick up the scanner. -
Page 25: Sleep Mode
Sleep mode After the scanner has been inactive for an extended period of time, the laser and/or motor automatically turns off and enter “sleep mode”, and indicated by a blink of the Red light (blinking at a 1-second rate). To wake up the unit, simply present an object to the scanner window or press the button at the sides. -
Page 26: Led And Beeper Indications
LED and Beeper Indications LED indication There are red and green dual color LED indications on the head of the Z-6070 that indicates the operational status of the scanner. The LED status with different indications are as follows. LED status Indication No power apply to the scanner Steady Red light... - Page 27 Beeper Indication When the scanner is in operation, the sound indicates the statuses as follows. Beeper Indication One Beep A barcode has been successfully decoded. Series three Beep This indicates the scanner passed the self-test and is operating properly. When the scanner is powered up. Series two beep This indicates when you’re going into programming...
-
Page 28: Changing Beeper Volume Using Push Button
Changing Beeper Volume Using Push Button The scanner can be programmed to change beeper tone, volume and duration, the beeper volume can also be changed by using push button. The volume has 3 different selections, low, medium, loud, which is operated follow the following steps. Always keep the scanner in the stand Press and hold down any one of the side buttons (left or right) for about 5 seconds, the scanner will enter... -
Page 29: Maintaining The Scanner
Maintaining the Scanner The Z-6070 laser scanner rarely needs any maintenance. Only an occasional cleaning of the scanner window is necessary in order to remove dirt and fingerprints. The cleaning of the scanner window can be done during operation with a soft lint-free cloth and a non-abrasive cleaner to avoid scratching. -
Page 30: Controlling Scanner From The Pos System
Controlling Scanner from the POS System Z-6070 can be controlled from the POS system via the RS-232C interface. Controlling can be accomplished by transmitting the following single byte commands to the scanner. The default setting of the commands are as follows: ASCII Code Function... -
Page 31: Laser Safety
Laser Safety Z-6070 laser scanner complies with safety standard IEC 60825 for a Class I laser product. It also complies with CDRH as applicable to a Class IIa laser product. Avoid long term viewing into direct laser light. Optical: The use of optical instruments with this product will increase eye hazard. - Page 32 Adjustments: Do not attempt any adjustments or alteration of this product. Do not remove the protective housing of the scanner. There are no user-serviceable parts inside. Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure.
-
Page 33: Appendixes
APPENDIX TECHNICAL SPECIFICATION... -
Page 34: Appendix A: Connector & Pin Out
Appendix A: Connector and Pin out The Z-6070 has multi interface: RS232, Keyboard Wedge, wand emulation and USB, all in one. The pin definition for the scanner port and the connector to be used for the port are shown in the connection diagram below. Pin out Configuration Function PIN#... -
Page 35: Appendix B: Specifications
Appendix B: Specifications Electrical DC Input To Scanner 5V±5% Power Consumption 1.25 watts Power Current 250 mA@5V Interfaces RS232C Interface Keyboard Emulation (IBM PC/AT, PS/2 compatible) USB interface Optical 650 ± 5 nm visible laser diode Light Source Depth Of Field 210 mm (8 inches) 10 direction scan field, 32 line scan Scan Pattern... - Page 36 Cable Straight 2M length Dimensions Decoding Barcode Types EAN/UPC/JAN + Add-on Code 128, EAN 128, Code 39, Code 32, Code 93,Codabar, Interleaved 2 of 5,MSI / Plessy, Chinese post code,RSS14(optional) Laser Safety CDRH class IIa, IEC 60825 class1 EMCl Compliance CE EN55022,B, FCC part 15 Class A,VCCI,BSMI...
-
Page 37: Appendix C: Trouble Shooting
Appendix C: Trouble-shooting This section contains information about how to solve problems that you may encounter when operating the scanner. If troubles occur, please refer to the following diagnostic tips as a mean to solve the trouble. However, before referring to the tips, make sure that the scanner is installed as instructed in this manual and that all cables are properly connected. - Page 38 red and Green safeguard circuit. Disconnect the scanner from its power source immediately and contact your dealer. The scanner does There is no proper handshaking not accept more with the POS system. Switch on than two or three the POS system and check barcode labels.
- Page 39 not suit your POS system.. Contact your dealer for the correct communication cable. The software running on the POS system does not support the data format of the label.
Need help?
Do you have a question about the Z-6070 Series and is the answer not in the manual?
Questions and answers