Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zebex Z-8072
Summary of Contents for Zebex Z-8072
- Page 1 8072 2D Image Hands-Free Scanner...
- Page 3 ’ ANUAL Revision History Changes to the original manual are listed below: Version Date Description of Version 03/24/2016 Initial release 03/15/2018 Added Plus version DOF, IR, and LED 2D Image Hands-Free Scanner...
- Page 4 ’ ANUAL Important Notice No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. We are not liable for any errors contained herein or incidental or consequential damages in connection with furnishing, performance or use of this material.
-
Page 5: Table Of Contents
’ ANUAL Table of Contents Introduction .........................1 Unpacking........................2 Outline .........................3 Installing the Device .....................4 Using Mounting Screw ..................4 Adjusting Scan Angle....................5 Connection........................6 Interface Cable .....................6 Connecting to the Host ..................7 Power Connection....................7 Scanner Operation .......................9 Setting Up the Scanner....................10 Scan Test........................10 Programming the Scanner ..................11 How to Scan in Different Mode..................12 Presentation Mode ....................12... -
Page 7: Introduction
’ ANUAL Introduction Lighting speed without compromising performance, the scanner features a powerful 2D engine that easily decodes most 1D and 2D barcodes with intuitive aiming accuracy. It also excels at reading barcodes on smart phone screens and barcodes that are poorly printed. -
Page 8: Unpacking
’ ANUAL Unpacking The hands-free scanner package contains: 2D Image Hands-Free Scanner Communication cable (Type depends on customer selection) Power adapter (only for specific RS-232 cables as optional accessory) Quick Guide Please leave this user’s manual within easy access for persons using the scanner. -
Page 9: Outline
’ ANUAL Outline Description Function LED Indicator Reading status indication Scan Window Read barcodes Speaker Exit For beep tone indication Trigger Button Push to scan Hinge Shaft Allow adjustment of device body forwards or backwards Interface Cable For interface communication cable connection Connection 2D Image Hands-Free Scanner... -
Page 10: Installing The Device
’ ANUAL Installing the Device Using Mounting Screw The device is reserved with 2 mounting holes for permanent fixture if required. Refer to the figure below for detailed information. Unit: mm(inch) Mounting screw holes 2D Image Hands-Free Scanner... -
Page 11: Adjusting Scan Angle
’ ANUAL Adjusting Scan Angle The device has a hinge shaft that allows tilt forwards and backwards in certain angle. Gently holds the device with one hand and move the scan angle as needed; use a coin to tighten the screws on both sides of the stand when necessary. Scan angle Do not let the scan LED light face directly to human eyes. -
Page 12: Connection
’ ANUAL Connection Interface Cable The interface cable comes with different host-end connectors, and there are 2 standard types of interface connection that this device supports: HID USB interface RS-232 interface **Refer to Connector and Pin our section for pin-out configuration of each interface available Insert the cable to device Follow as illustrated below to insert the RJ-45 connector side of cable into the device. -
Page 13: Connecting To The Host
’ ANUAL Connecting to the Host Follow the steps below to connect the interface cable to the host. Connect the host-end of the interface cable to the appropriate connector on the host system. For those cases where external power is used, plug the external AC power adapter into the jack on the interface cable. - Page 14 ’ ANUAL Follow the steps below when you need an external power connection to the scanner: Connect the interface cable to the bottom of the scanner. Connect the other end of the interface cable to the host (refer to your host manual to locate the correct port).
-
Page 15: Scanner Operation
’ ANUAL Scanner Operation Please follow the procedure below to verify scanning operation. Insert the modular plug of the Interface cable into the back of the scanner until a firm click is heard. If necessary, plug the power adapter into the jack on the interface cable. Plug the AC end of the power adapter into an AC outlet, or plug the other end of cable into host if power adapter is not needed. -
Page 16: Setting Up The Scanner
’ ANUAL Setting Up the Scanner In certain cases no setup is required. The scanner is either pre-programmed to suit the situation, or it automatically detects and is ready to go. In other cases the scanner must be informed about what kind of system it is connected to. This can be done in a few moments using the programming barcodes in the Programming Guide. -
Page 17: Programming The Scanner
’ ANUAL Programming the Scanner When the scanner is powered on (green LED lights), find the <Set> barcode in the Programming Guide and present this barcode to the scanner. When the scanner gives two beeps, it means the scanner is in programming mode. Decide which parameters are required and find their barcodes in the Programming Guide. -
Page 18: How To Scan In Different Mode
’ ANUAL How to Scan in Different Mode Presentation Mode In this mode, the front scan window is in automatic mode and reads barcodes as the barcode approaches with the scanning field. The adjustable stand allows to be tilted forwards and backwards in position when scanning various sized objects. -
Page 19: Manual Scan
’ ANUAL Manual Scan The scanner can also be used as a handheld scanner by simply pressing the button. Trigger button Press down the trigger button and a light pattern would appear. It allows you to aim at the barcode. Press the button to decode the barcode. -
Page 20: Sleep Mode
’ ANUAL Sleep Mode After the scanner has been inactive for a period of time, the scanner would enter the sleep mode and the green LED would blink as indication. After 30 seconds inaction, the scanner would enter the sleep mode from presentation mode. -
Page 21: Beeper Indication
’ ANUAL Beeper Indication Beeps Indication 3 beeps in a series from low to high pitch Power up 1 short beep A barcode has been successfully decoded 2 short beeps The scanner has entered program mode 1 long beep A setting has been programmed 3 beeps in a series from low to high pitch The scanner has exited program mode 3 short beeps... -
Page 22: Usb Virtual Com
’ ANUAL USB Virtual COM If you use virtual COM port emulation, follow the steps below to start using the scanner. Execute the driver (VCOM-Driver-Installation.exe). Connect the scanner USB cable to the host computer. Set the interface to USB Virtual COM Port. Enable USB virtual COM 2D Image Hands-Free Scanner... -
Page 23: Trouble Shooting
’ ANUAL On the computer, check Device Manager to see if the computer successfully detects the scanner as “Barcode Scanner USB-COM device.” (The COM port number would vary depending on different hardware environment). Trouble Shooting This section contains information about how to solve problems that you may encounter when operating the scanner. -
Page 24: Maintaining The Scanner
’ ANUAL Maintaining the Scanner Cleaning the Scan Window The scanner is designed for long-term trouble-free operation and rarely requires any maintenance. Only an occasional cleaning of the scanner window is necessary in order to remove dirt and fingerprints. Wipe the scan window with a soft lint-free cloth and a non-abrasive cleaner to avoid scratching and damaging the scan window. -
Page 25: Specification
’ ANUAL Specification Sensor Resolution 752H × 480V pixels Light Source 2* 617nm LED (Red) Image Field of View (Scan Zone) 44.4°H x 29.1°V Roll/ Pitch/ Yaw 360°/ ± 65°/ ± 60° Scan Rate 60 fps Optical Print Contrast Ratio (Minimum) 30% @ UPC/EAN 100% Code 39 (5 mil): 0 - 50 mm UPC/EAN (13 mil): 0 - 210 mm Code 39: 5 mil... -
Page 26: Connector And Pin Out
’ ANUAL Connector and Pin Out Device PIN-OUT CONFIGURATION FUNCTION RS-232C USB Power RTS_TTL TXD_TTL RXD_TTL CTS_TTL Interface Cable RS-232C Cable – DTE pin out PIN-OUT CONFIGURATION DB-9 (F) FUNCTION USB Cable –USB Type A Connector Function 2D Image Hands-Free Scanner... -
Page 27: Dimension
’ ANUAL Dimension Z-8072 & Z-8072 Plus Unit: mm (inch) 2D Image Hands-Free Scanner... -
Page 28: Field Of View & Depth Of Field
’ ANUAL Field of View & Depth of Field Z-8072 & Z-8072 Plus 2D Image Hands-Free Scanner... -
Page 29: Ir View
’ ANUAL IR View The following shows the IR activation area for the build-in object detection sensor. Z-8072 version Unit: mm 2D Image Hands-Free Scanner... - Page 30 ’ ANUAL Z-8072 Plus version Unit: mm 2D Image Hands-Free Scanner...
-
Page 31: Led View
’ ANUAL LED View Z-8072 version 2D Image Hands-Free Scanner... - Page 32 ’ ANUAL Z-8072 Plus version 2D Image Hands-Free Scanner...