Master & Slave Setup And Powering On - Wallbox Copper Installation Manual

3. 1 Master and Slave setup and Powering On
The selection of the rotary switch determines the role in the power sharing system.
0 Slave
8 or 9 Master
Any other Normal charger
(see installation manual)
The chargers can be configured in the following way:
• Any combinations are possible
• The master can be set at any position within the group (T or NT).
EN - V2.0
INSTALLATION GUIDE
Charger Master
Copper
Commander
Pulsar
12
Slave
X x
X X
x