BIO RAD PowerPac HV Series Instruction Manual page 21

Step Procedure
6. Start the run
7. Monitor the run
8. Pause
PowerPac HV – Instruction Manual
Description
Press to start a run. A run may be started from
any
screen of the EDIT loop as long as a valid
constant parameter value has been entered.
The run screen displays the elapsed time versus the
programmed time (timed runs), elapsed time
(untimed run), voltage, current and power values.
Press the soft key PAUSE or the
the run in progress.
The run parameters and user preferences may be
edited during pause.
Press EDIT to change run parameters
Press SETUP to change user preferences.
Press the soft key CONTINUE or the
resume the run.
key to pause
key to
13