BIO RAD PowerPac HV Series Instruction Manual page 17

KEY CHIRP
IRDA ON
CONTRAST HI
* KEY CHIRP ON
CHANGE EXIT RESET
DATE
ETUP
KEY CHIRP ON
DATE 12/07/04
* TIME 16:38 HR
CHANGE EXIT RE ET
TIME
ETUP
KEY CHIRP ON
DATE 12/07/04
* TIME 16:38 HR
CHANGE EXIT RE ET
TEMP PROBE CK
Temperature Probe Check
PowerPac HV – Instruction Manual
ON Activates the audible signal for keystroke.
(Default)
OFF
MM/DD/YY This is the only format available.
Press the change soft key then enter the
correct date using the alphanumeric
keypad.
HH:mm 24 hr format. Factory setting is Pacific
Standard time
Press the change soft key then enter the
correct time using the alphanumeric
keypad.
ON This preference is only available when
(Default) the temperature probe is connected.
OFF
ON: The run is paused and error code
18 is displayed in case of failure. A failure
occurs when the temperature remains
5°C less than the set temperature for
more than 15 minutes. This can be caused
by a detached temperature probe or an
insufficient power setting.
OFF: Run will continue regardless the
temperature.
9