Table of Contents
Advertisement
INSERTION / REMOVAL OF DRAWER ASSEMBLY
To remove drawer assembly, loosen SCREW (3), then unplug CONTROL
A)
BOX (1) by carefully pulling it back and then up.
B)
Remove the AIR TUBE COVER PLATE (5) by loosening the two retaining
SCREWS (4).
C)
Loosen SCREW (2), and then slide the complete drawer assembly out of the
combustion head as shown.
D)
To insert drawer assembly, reverse the procedure in items A to C above, and
then attach fuel line to the pump.
- 16 -
Advertisement
Table of Contents
