Star Micronics Rainbow NX-1000C User Manual page 78

Set page length to n lines
<27> <67>
<n>
Sets the page length to
n
lines in the current line spacing, where
n
is
between I and 255. Changing the line spacing later does not alter the physical
page length. The current line becomes the top of the page, and the bottom
margin is canceled.
I
Set page length to n inches <27> <67> <0>
<n>
I
Sets the page length to n inches, where n is between I and 32. The current
line becomes the top of the page, and the bottom margin is canceled.
fi
I
Set top margin
< 27 > < 99 > < n >
I
Sets the top margin to
(n -
1) lines, where
n
is between 1 and 255. Printing
begins on the nth line on the page. The power-up default is n 1, giving
no top margin.
I
Set bottom margin
<27> <78>
<n>
Sets the bottom margin to
n
lines, where
n
is between 0 and 255. The
power-up default is 0, giving no bottom margin. The bottom margin is reset
when you change the page length.
I
Set six-line bottom margin < 147>
I
Sets the bottom margin to six lines. When there are only six lines left
on the page, the printer automatically feeds to the next page.
Cancel top and bottom margins <27> <79>
Alternate coding: < 19 >
Cancels both the top margin and the bottom margin.
Form feed
< 12>
Feeds the paper to the top of the next page according to the current
page length, and moves the print position to the left margin. When the
automatic sheet feeder (ASF) is selected (DIP switch 10 is OFF), this
command ejects the current page.
I
Return to top of current page
<27> < 12>
I
Feeds the paper backward to the top of the current page of a fanfold
form. Ignored when friction feed is used.
68