Star Micronics Rainbow NX-1000C User Manual page 80

Set right margin <27> <81>
<n>
Sets the right margin at column
n
in the current character pitch (pica
Ii
pitch if proportional spacing is currently selected). Column
n
becomes the
m
i
last character position in the line. The right margin does not move if the
character pitch is changed later. The right margin must be within the limits
II
below:
Pica
Elite
Condensed pica
Condensed elite
Expanded pica
Expanded elite
Expanded condensed pica
Expanded condensed elite
4 ::;; n ::;; 80
5 ::;;
n ::;;
96
7 ::;; n ::;; 137
8 ::;; n ::;; 160
2 ::;;
n ::;;
40
3 ::;; n ::;;
48
4 ::;;
n ::;;
68
4::;;
n ::;;
80
The right margin can also be set from the control panel.
Carriage return
r1
< 13>
Prints the current line and returns the next print position to the left
I
i
margin. If DIP switch 1 is ON, also performs a line feed.
I
Backspace
<
8 > (ASCII mode only)
I
Moves the print position one column to the left. Ignored if the print
position is at the left margin. This command can be used to overstrike or
combine characters.
Left justify < 27 > < 97 > < 48 >
Alternate coding: < 27 > < 97> < 0 >
Aligns subsequent text with the left margin, leaving the right margin
ragged.
Center text <27> <97> <49>
Alternate coding: < 27 > < 97 > < 1 >
Centers subsequent text between the left and right margins.
Right justify < 27 > < 97 > < 50 >
Alternate coding: < 27> < 97 > < 2 >
Aligns subsequent text with the right margin, leaving the left margin
ragged.
70