Star Micronics Rainbow NX-1000C User Manual page 68

Dielectric strength Withstands 1 kV AC rms at 50 or 60 Hz
between AC power line and chassis for
at least 1 minute
• Environmental Requirements
Operating temperature 5 to 40°C (41 to 104°F)
Operating humidity 10% to 80% (no condensation)
Storage temperature - 30 to 65°C (- 22 to 149°F)
Storage humidity 10% to 95% (at 40°C) (no condensation)
• Special Features
Semi-auto loading
Paper parking
Automatic sheet feeder (option)
Panel mode
Micro-feed
Hexadecimal dump
• Interface Signals
Pin
No.
Signal
Direction Function
Name
1 SRQ OUT Not used
2 GND Signal ground
3 ATN
IN
Serial Attention In
High: Data transfer mode
Low: Command transfer mode
4 CLK IN Serial Clock In
The printer begins reading data on the rising
edge of this signal.
5 DATA4 IN/OUT Serial Data In/Out
IN: Conveys commands and data from the
computer to the printer
OUT: High indicates printer ready; Low
indicates printer busy.
6
RESET IN Low input initializes the printer to its
power-up condition and clears the memory
buffer.
58
r:
fl
r