Equipment Setup; Unpacking; Location And Placement - Global Sensor Systems ExpressCube 265R User Manual

Equipment Setup

2.
2.1.

Unpacking

The ExpressCube countertop unit is shipped with the back of the
unit folded onto the platform. Carefully remove the unit from the
packing material and place the unit in the final location prior to
removing the shipping brackets that secures the back to the top
platform.
Unscrew the leveling feet until approximately one-half inch is
extended from the bottom of the unit. This will allow maximum
flexibility in leveling the unit.
The ExpressCube countertop unit may be provided with optional display and connecting hardware.
It is important to review the equipment list provided in the shipping container to ensure that all items
have been removed prior to disposal of the shipping container.
With the protective shipping brackets removed, care must be taken not to subject
the folded back assembly to any twisting or impacts that could harm the hinge assembly.
2.2.

Location and Placement

Refer to the specifications to obtain the outside dimensions of this model of ExpressCube countertop
unit. This unit should be placed on a countertop or table that has a surface area that is equal or
greater to the physical dimensions referred to in the specifications. It is important for accurate
weight measurements that the surface is reasonably level, flat and stable.
Ensure that the area selected for the ExpressCube countertop unit is free from objects that could
touch the unit and that there is adequate space to place and measure packages without obstruction.
The ExpressCube countertop unit should be located within four feet of a power source. Verify with
the specifications and the power adapter shipped that the power source and the ExpressCube
power adapter are compatible.
6
ExpressCube Shipping / Storage