Table of Contents
Advertisement
9.4.
Replacing the Sensor Lens
If a sensor lens becomes foggy (opaque) from wear, cracked or broken it should be replaced. All
three lenses have a cover to permit safe and quick replacement of the lens. The covers are held on
by two screws and there locations are illustrated below.
10.
Troubleshooting
10.1. Summary
The ExpressCube™ countertop is a multi-dimensional precision instrument designed to work in a
variety of working environments. The internal assembly is sealed to preserve the integrity of this
measuring instrument. There are a number of problems that may arise that can be addressed
without tampering with the seals which are reviewed in this section along with problems involving
possible parts replacement.
This section addresses problems that are occurring in lieu of the device being properly
installed, cleaned and operated as per the above sections.
Only authorized technicians may break the seals to perform repairs on the ExpressCube
countertop unit. Unauthorized personnel breaking the seals for any reason will void the
government certification and possibly void the warranty on the unit.
33
Advertisement
Table of Contents
Need help?
Do you have a question about the ExpressCube 265R and is the answer not in the manual?