How To Program An Abort Switch - Notifier AFC-600 Programming Manual

$SSHQGL[ $ 5HOHDVLQJ $SSOLFDWLRQV
54
Technical Manuals Online! - http://www.tech-man.com
8VLQJ7\SH&RGHVIRU5HOHDVLQJ=RQHV
The control panel provides a set of Type Codes designed for releasing applications for
inputs (Table 31) and outputs (Table 32). This section details how to program each of
these Type Codes.
Table 31 lists Type Codes designed for Releasing Zone inputs (monitor modules).
Type Code What the Type Code does
Provides an abort function through a
ABORT SWITCH
(tracking) monitor module (connected to a
UL-listed abort station) for a
Releasing Zone.
. Provides a manual release through a
MAN RELEASE
(latching) monitor module (connected to a
UL-listed pull station) for a
Releasing Zone.
Provides a manual release with
MAN REL DELAY
(latching)
a 10-second delay through a
monitor module (connected to a
UL-listed pull station) for a
Releasing Zone.
Provides a second manual
SECOND SHOT
(latching)
release through a monitor
module (connected to a
UL-listed pull station) for a
Releasing Zone.
7DEOH  7\SH &RGHV IRU 5HOHDVLQJ =RQH ,QSXWV
Table 32 lists the Type Codes designed for Releasing Zone outputs (control modules,
NACs, and Panel Circuits).
Type Code What the Type Code does
Activates an NAC audio or visual
REL END BELL
device when releasing circuits shut
off.
Directs outputs to perform a release
REL CKT ULC
function as required by ULC.
Directs outputs to perform a releasing
RELEASE CKT
function.
. Directs relay outputs to perform a
RELEA FORM C
releasing function.
Activates audio or visual devices to
REL AUDIBLE
steady when releasing starts.
Activates non-releasing output with
INSTANT RELE
no delay time.
Activates audio or visual devices to
REL CODE BELL
pulse at 120 ppm (Delay Timer
activation) or 20 ppm (Cross Zone
activation).
7DEOH  7\SH &RGHV IRU 5HOHDVLQJ =RQH 2XWSXWV
How to Program a Releasing Zone
Refer to

"How to Program an Abort Switch"

on page 55
"How to Program a Manual Release
Switch" on page 56
"How to Program a Manual Release
Delay Switch" on page 57
"How to Program a Second Shot
Switch" on page 58
Refer to
"How to Program a Release End Bell
Circuit" on page 59
"How to Program a ULC Release
Circuit" on page 60
"How to Program a Release Circuit"
on page 61
"How to Program a Release Form-C
Circuit" on page 62
"How to Program a Release Audible
Circuit" on page 63
"How to Program an Instant Release
Circuit" on page 64
"How to Program a Release Code
Bell Circuit" on page 65
AFC-600 Programming PN 51032:A 3/8/99