How To Select A Programming Method - Notifier AFC-600 Programming Manual

 *HWWLQJ 6WDUWHG
+RZWR6HOHFWD3URJUDPPLQJ0HWKRG
+RZWR(QWHUD3URJUDPPLQJ3DVVZRUG
12
Technical Manuals Online! - http://www.tech-man.com
The AFC-600 provides two methods for field-programming the control panel: using the
Program Change options or the Veri•Fire™ 600 Upload/Download Utility. Table 4 lists
the benefits of each method:
Programming method
Program Change
Veri•Fire 600 600 Upload/
Download Utility
7DEOH  )LHOG3URJUDPPLQJ 2SWLRQV
The AFC-600 provides two types of selectable passwords: Program Change and Status
Change. For security purposes, you can change your passwords. To do so, follow the
instructions in "How to Change a Password (3=
for uses and the factory-set password for each type of programming password:
Password type Use to
Program Change Enter Program Change (see Figure 8 on page 15) to
(high level) program control essential control panel functions,
including basic system functions and utility options.
(For more information on Program Change selection,
refer to "What is Program Change?" on page 13.)
Status Change Enter Status Change (see the "Status Change Screen"
(low level) on page 39) to program minor program functions.
7DEOH  3URJUDPPLQJ 3DVVZRUGV
Enter a password to enter Program Change or Status Change. In Program Change or
Status Change, the control panel does the following:
• Activates the System Trouble relay (TB5 on the MPS-6)
• Shuts off the panel sounder
• Flashes the
SYSTEM TROUBLE

How to Select a Programming Method

Benefits
Speed and convenience of
putting the control panel on
line quickly (using the
Autoprogram function) and
changing programming
information.
Efficient means of creating
and editing programs that
require a lot of data entry.
)" on page 26. Refer to Table 5
PASSWD
LED, which continues to flash while programming
AFC-600 Programming PN 51032:A 3/8/99
Refer to
"How to Use the Basic
Program" on page 15
"How to Install Veri•Fire
Components" on page 85
Factory Setting
00000
11111