Table of Contents
Advertisement
Figure 4 Attaching cable management brackets to a T9006 IPS
(1) Attach the cable management bracket to the chassis
(2) Screw holes for installing the cable management bracket
(3) Screws for attaching the cable management bracket to the chassis
(4) Power cord management bracket (installed at the lower part of the chassis)
Attaching the mounting brackets to the IPS
Identify the left and right mounting brackets by their marks L and R. Attach the left and right mounting
brackets to the two sides of the IPS, as shown in
When you install the mounting brackets, face the front of the IPS.
Figure 5 Attaching the mounting brackets to a T9006 IPS
(1) Screws for attaching the mounting bracket to the chassis
(3) Signal cable management bracket
Figure
5.
(2) Mounting bracket
6
1
2
3
Advertisement
Table of Contents
