Fuel Filter: Drain Water (Diesel Engine); Cooling System: Check Frost Protection And Coolant Level - Volkswagen Amarok 2011 Maintenance Manual

Amarok 2011 ➤
Maintenance - Edition 01.2011
Perform the following jobs:
– Connect vehicle diagnostic, testing and information system -
VAS 5051B- or vehicle diagnostic and service information
system -VAS 5052 A- with ignition switched off
– Switch on ignition.
– Press the
Guided functions
– Then perform vehicle identification.
– Select following functions one after another:
♦ „Systems capable of self-diagnosis"
♦ „Diesel direct injection and glow plug system"
♦ „Functions"
♦ „Bleeding fuel system"
– Follow instructions on display of vehicle diagnostic, testing
and information system -VAS 5051B- or vehicle diagnostic
and service information system -VAS 5052 A- .
– After bleeding the fuel system, exit „Guided functions" using
button.
GoTo
– Touch function
End
– Select function
End
– Switch off ignition.
– Disconnect diagnosis connector from vehicle.
Bleeding the fuel system is finished.
4.27

Fuel filter: Drain water (diesel engine)

Perform the following jobs:
– Unscrew drain plug from bottom end of filter and collect ap‐
prox. 100 ml of fuel into a suitable container.
– Screw drain plug back in, if necessary first fitting it with a new
seal if the old one was damaged.
Note
Observe disposal regulations!
4.28 Cooling system: Check frost protection
and coolant level
Caution
Only distilled water may be used for mixing G12 plus-plus. The
use of distilled water enables the optimal level of corrosion
protection to be reached.
84
4. Descriptions of work
button on the display.
on display.
in „End menu".
⇒ page 71 .