There are two ways to clear the event memory:
♦ Clearing event memory by selecting individual control units:
Perform the following jobs:
– Select control unit in question individually in overview, select
Read event memory
.
ry
♦ Clearing event memory via function
Perform the following jobs:
– Call up
Collection services
– and then select
Delete event memory
Note
If all faults have been cleared, it is shown on display.
♦
The diagnosis log can be sent automatically »online«.
♦
The vehicle system test is completed.
4.19
Four-wheel drive: Insert fuse
Insert fuse 46 on fuse holder C -SC46- „4 x 4" four-wheel drive
control unit
Special tools and workshop equipment required
♦ Vehicle diagnostic, testing and information system -VAS
5051B- or subsequent units
♦ Diagnosis cable 5m -VAS 5051B/1-
Or
♦ Diagnosis cable -VAS 5051/5A-
Or
♦ Vehicle diagnostic and service information system -VAS 5052
A-
♦ Diagnosis cable, 2 m -VAS 5052/3 A-
Or
♦ Diagnosis cable, 5 m -VAS 5052/3 A-1-
Perform the following jobs:
– Switch off ignition, all electrical consumers and withdraw igni‐
tion key.
and then press
Delete event memo-
Collection services
on display,
function.
Amarok 2011 ➤
Maintenance - Edition 01.2011
:
4. Descriptions of work
77