– Select „Generate readiness code" -arrow-.
– Follow instructions of vehicle diagnostic, testing and informa‐
tion system -VAS 5051B- or vehicle diagnostic and service
information system -VAS 5052- .
Evaluation:
After running through readiness code, result appears on screen.
Note
Exhaust emissions test is PASSED when all „ACTUAL values"
♦
correspond to „SPECIFICATIONS".
♦
If not all readiness codes are set, an exhaust emissions test
must be carried out
– Print out the evaluation with
– End programme.
– Remove vehicle diagnostic, testing and information system -
VAS 5051B- or vehicle diagnostic and service information
system -VAS 5052- .
– Complete exhaust emissions test record according to Annex
VIII No. 3.1.1.1 German vehicle licensing regulations.
– Close fuse box cover on left under dash panel.
Note
Exhaust emissions test badges are omitted as of 1 January
♦
2010; only the main inspection badges are then available.
Existing exhaust emissions test badges will be removed from
♦
the vehicle by the test centres at the next main inspection or
so-called "repair badges" will be affixed over them.
No obligation of storage and submission exists for the exhaust
♦
emissions test records if the exhaust emissions test record has
been transferred to the main inspection test report by the offi‐
cially recognised expert.
⇒ page 134
.
.
Print
Amarok 2011 ➤
Maintenance - Edition 01.2011
5. Exhaust emissions test
147