5.2
Exhaust emissions test for petrol en‐
gines with engine code CFPA
Note
The following description refers to vehicles fitted with „On‐
♦
board diagnosis" (OBD) and regulated catalytic converter.
The OBD monitors all components and part systems influenc‐
♦
ing the exhaust emissions quality.
Special tools and workshop equipment required
♦ Emissions testing station -VAS 6300-
♦ OBD adapter cable -VAS 5052/16-
♦ Data sheets for exhaust emissions test
Note
It is only possible to carry out an exhaust emissions test when
♦
all units of the emissions testing station -VAS 6300- are con‐
nected properly and combined with each other according to
the ⇒ operating instructions .
All work to be performed is displayed by the emissions testing
♦
station -VAS 6300- .
Test prerequisites
•
All test conditions and data required for exhaust emissions test
⇒ Data sheets for exhaust emissions test for respective engine
•
For bar code reading the EET data sheet must be printed out.
•
Manual gearbox: Gear lever in neutral
•
Handbrake pulled on
– Perform exhaust emission test according to instructions on
display.
Amarok 2011 ➤
Maintenance - Edition 01.2011
5. Exhaust emissions test
135