Performing Vehicle System Test - Volkswagen Amarok 2011 Maintenance Manual

Amarok 2011 ➤
Maintenance - Edition 01.2011
– Connect diagnosis cable connector to diagnosis connection
with ignition switched off.
– Switch on tester.
– Switch on ignition.
– Touch the field on the screen for
Guided functions
– Select one after another:
♦ Brand
♦ Type
♦ Model year
♦ Version
♦ Engine code
– Confirm entered data.
Note
Wait until tester has read all control units in vehicle.
– Press button and select
GoTo
function.
tion
Now follow screen display to start desired functions.
4.18

Performing vehicle system test

– Connect vehicle diagnostic, testing and information system -
VAS 5051B- or vehicle diagnostic and service information
system -VAS 5052 A-
Note
Observe current operating instructions for vehicle diagnostic,
testing and information system -VAS 5051B- or vehicle diagnostic
and service information system -VAS 5052 A- , which are shown
on display after selecting the functions
.
Operating manual
WARNING
♦ If the vehicle diagnostic, testing and information system -
VAS 5051B- or the vehicle diagnostic and service infor‐
mation system -VAS 5052 A- is placed in the range of
action of an airbag during a test or measuring run,
♦ there is a risk of severe or fatal injury should an airbag be
triggered!
♦ During the road test take another person with you who can
operate the vehicle diagnostic, testing and information
system -VAS 5051B- or vehicle diagnostic and service in‐
formation system -VAS 5052 A- from the rear seat.
♦ Always secure testing and measuring equipment on the
rear seat during a road test.
74
4. Descriptions of work
Guided fault finding
.
Function/component selec-
⇒ page 71 .
Administration
or
and